Kunwei Six-axis force sensor KWR116
Model: KWR116
Brand: Kunwei
Product Introduction
The KWR116 six-axis force sensor is a six-dimensional force sensor with a large bending moment range. It has a built-in high-precision embedded intelligent circuit and can measure and output forces and torques in three directions in real time. The product is made of high-strength alloy steel, which meets the installation requirements of slender actuators and has been used in data room inspections and outdoor high-voltage electrical equipment inspections.
●Six-axis joint calibration to fully suppress crosstalk
●Built-in high-precision embedded data acquisition and calculation system
●Strong overload capacity, suitable for force measurement of robot end effectors with longer lengths
●Adopts high-strength alloy (martensitic stainless steel), high overload, high rigidity and high sensitivity
Model | KWR116 |
Fx,Fy(N) | 1400 |
F2(N) | 1400 |
Mx.My(Nm) | 120 |
Mz(Nm) | 120 |
Diameter(mm) | 116 |
High(mm) | 26 |
Material | Alloy steel |
Surface treatment | Electrolytic polishing |
Overload level(%6) | 200 |
Repeatability(%FS) | 0.2 |
Accuracy(%FS) | 0.5 |
Weight(kg) | 1.4 |
Protection level | IP64 |
Operating temperature(℃C) | 0~80 |
Sampling frequency(Hz) | 1000 |
Supply voltage(VDC) | 9~24 |
Communication Interface | RS422/RS485/MODBUS/Industrial Ethernet/USB, etc. |
