• DC TIG ·AC TIG ·Multiple output waveforms ·Pulse.
• Excellent welding performance.
• Simple arc starting, stable arc, high welding quality.
• There are multiple waveforms to choose from in AC argon arc welding: standard square wave, non-standard square wave, sine wave, triangle wave and mixed wave, among which non-standard square wave has multiple waveforms to choose from.
• By adjusting the peak current, base current, pulse frequency, duty cycle, AC current, AC frequency and cleaning ratio, the required penetration depth, penetration width and uniformity of surface ripples can be obtained, which can extend the life of tungsten electrode and is particularly suitable for automatic welding and robot welding.
• Up to 30 sets of user-defined specification parameters can be stored for easy call.
• Fully digital high-precision wire feeding control system, two-drive two-slave with encoder fully digital control wire feeding device, even if external factors such as power supply voltage and wire feeding resistance change, it can still ensure the stability of wire feeding.
• Suitable for thin plate welding of various materials such as stainless steel, carbon steel, copper, titanium, aluminum and its alloys.
• Rich additional functions of the robot.
• The digital interface is equipped with arc voltage tracking function, which can cooperate with the robot to complete the tracking of the weld.
• Open digital communication mode, the robot can control the welding machine current, wire feeding speed, arc start delay wire feeding time, arc extinction wire drawing length and other process parameters.
• International standard Devicenet, CAN, CANopen, EntherNetIP and other digital communication interfaces, to achieve seamless integration with different brands of robots.
• Integrated analog communication interface, current, wire feeding speed, arc start, inching wire feeding and other functions of the robot remote control, plug and play.
Model | WSME-315IIIR | WSME-500IIIR |
Rated input voltage / frequency (V / Hz) | Three-phase 380 ± 10% 50 |
Rated input capacity (KVA) | 13 | 26 |
Rated input current (A) | 20 | 39 |
Rated load persistence rate of (%) | 60 |
Output no-load voltage (V) | 79 | 77 |
Output current range (A) | 5~320 | 8~510 |
Current current (A) | 5~320 | 8~510 |
Peak point current (A) | 5~320 | 8~510 |
Background current (A) | 5~320 | 8~510 |
Striking current (A) | 5~315 | 8~500 |
Arc closing current (A) | 5~315 | 8~500 |
Duty cycle ratio of (%) | 15~85 |
Impulse frequency (Hz) | 0.2~999 |
Clean-up scale of (%) | -50~40 |
A-C cycle (Hz) | 40~250 |
Presgas time (S) | OFF/0.1~10.0 |
Gas extension time (S) | OFF/0.1~60.0 |
Slow ise time (S) | OFF/0.01~10.0 |
Decay time (S) | OFF/0.01~15.0 |
Wire diameter (mm) | 0.8、1.0、1.2、1.6 |
Send wire type | Push silk |
Gas Flow Rate (L/min) | 15~20 |
Cooling mode of welding gun | Water cold / air cold |
Case protection grade | IP21S |
Insulation grade | H |
Weight (Kg) | 40 | 70 |
Robot special hidden parameters |
Control mode (rEt) | OFF: close control ON 1: Analog remote control 0N2: Digital remote control |
Wire delivery speed (Fd 1) | OFF/0.3~7m/min |
Slow wire speed (Fd 2) | 0FF/0.3~7m/min |
Tap wire speed (Fdi) | 0.3~7m/min |
Wtraction time (Fbt) | 0FF/0.1~9.9s |
Delayed wire time (dt 1) | OFF/0.1~9.9s |
Lag wire time (dt 2) | OFF/0.1~9.9s |
Wfeeder switch (Fde) | OFF: Wire feeder ON: Wire feeder on |
