• Low interference.
• Can cut all metal materials, especially suitable for cutting high alloy steel and non-ferrous metals that cannot be cut by flame cutting.
• Highly concentrated arc energy, narrow cutting mouth, less slag, and straight cutting surface.
• Low-frequency arc starting, no interference to surrounding electronic equipment.
• Patented arc starting circuit, high arc starting success rate.
• Soft switching inverter technology, high reliability of the whole machine.
• High power factor, high efficiency and energy saving.
• Equipped with multiple safety protection functions such as gas shortage protection and thermal protection.
Model | LGK-120R |
Power Supply Voltage (V / Hz) | Three-phase 380 ± 10% 50 |
Rated input power (KVA) | 16.5 |
Rated input current (A) | 25 |
Output current adjustment range (A) | 30~120 |
Floating voltage (V) | 42100% |
Rated load persistence rate of (%) | 60 |
Cutting gun uses air pressure (MPa) | 0.4~0.55 |
Arc pressure output signal | 1:1 Arc voltage |
Supporting cutting gun | HB120 |
Cutting air flow rate (L/min) | 250 |
Maximum cut carbon steel thickness (mm) | 25 |
Best ated cut carbon steel thickness (mm) | 1~15 |
Volume (cm³) | 58X30X56 |
Weight (Kg) | 43 |
Insulation grade | H |
