• DC TIG ·AC TIG ·Multiple output waveforms ·Pulse
• Excellent welding performance
• Simple arc starting, stable arc and high welding quality.
• There are multiple waveform options for AC argon arc welding: standard square wave, non-standard square wave, sine wave, triangle wave and mixed wave, etc. Among them, non-standard square wave has a variety of waveforms to choose from.
• By adjusting the peak current, base current, pulse frequency, duty cycle, AC current, AC frequency, and cleaning ratio, the required penetration depth, penetration width, and uniformity of surface ripples for the weld can be obtained, extending the life of the tungsten electrode. Especially suitable for automatic welding and robot welding.
• Can store up to 30 sets of user-defined specification parameters for easy recall.
• Full digital high-precision wire feeding control system, two drives and two slaves with encoder fully digital control wire feeding device, which can ensure the stability of wire feeding even if external factors such as power supply voltage and wire feeding resistance change.
• Suitable for thin plate welding of various materials such as stainless steel, carbon steel, copper, titanium, aluminum and their alloys
• Rich additional robot functions
• The digital interface is equipped with arc voltage tracking function, which can be used with the robot to complete welding seam tracking.
• Open digital communication mode, the robot can control the welding machine current, wire feeding speed, arc starting delay wire feeding time, arc extinguishing wire drawing length and other process parameters.
• Internationally standard digital communication interfaces such as Devicenet, CAN, CANopen, and EntherNetIP enable seamless integration with robots of different brands.
• Integrated analog communication interface, remote control of current, wire feed speed, arc starting, inching wire feed and other functions of the robot, plug and play.
Model | WSME-315IIIR | WSME-500IIIR |
Rated input voltage / frequency (V / Hz) | Three-phase 380 ± 10% 50 |
Rated input capacity (KVA) | 13 | 26 |
Rated input current (A) | 20 | 39 |
Rated load persistence rate of (%) | 60 |
Output no-load voltage (V) | 79 | 77 |
Output current range (A) | 5~320 | 8~510 |
Current current (A) | 5~320 | 8~510 |
Peak point current (A) | 5~320 | 8~510 |
Background current (A) | 5~320 | 8~510 |
Striking current (A) | 5~315 | 8~500 |
Arc closing current (A) | 5~315 | 8~500 |
Duty cycle ratio of (%) | 15~85 |
Impulse frequency (Hz) | 0.2~999 |
Clean-up scale of (%) | -50~40 |
AC frequency (Hz) | 40~250 |
Presgas time (S) | OFF/0.1~10.0 |
Gas extension time (S) | OFF/0.1~60.0 |
Slow ise time (S) | OFF/0.01~10.0 |
Decay time (S) | OFF/0.01~15.0 |
Wire diameter (mm) | 0.8、1.0、1.2、1.6 |
Send wire type | Push silk |
Gas Flow Rate (L/min) | 15~20 |
Cooling mode of welding gun | Water cold / air cold |
Case protection grade | IP21S |
Insulation grade | H |
Weight (Kg) | 40 | 70 |
Robot special hidden parameters |
Control mode (rEt) | OFF: close control ON 1: Analog remote control 0N2: Digital remote control |
Wire delivery speed (Fd 1) | 0FF/0.3~7m/min |
Slow wire speed (Fd 2) | OFF/0.3~7m/min |
Tap wire speed (Fdi) | 0.3~7m/min |
Wtraction time (Fbt) | 0FF/0.1~9.9s |
Delayed wire time (dt 1) | 0FF/0.1~9.9s |
Lag wire time (dt 2) | OFF/0.1~9.9s |
Wfeeder switch (Fde) | OFF: Wire feeder ON: Wire feeder on |
